Epson 4113114-06 - Manual (Page 104)

Troubleshooting 104
❏ Run the head cleaning utility to clear any clogged ink nozzles.
& See “Cleaning the Print Head” on page 82.
❏ Use ink cartridges within six months after opening the packages.
❏ Use genuine Epson ink cartridges.
❏ Check the H Ink light. If the light is on, replace the appropriate ink cartridge.
& See “Replacing an Ink Cartridge” on page 77.
❏ Make sure the label type selected in the printer driver is appropriate for the type of disc
loaded in the product.
&
See “Publishing Discs” on page 23.
Vertical Misalignment
❏ Run the print head alignment utility.
& See “Aligning the Print Head” on page 84.
❏ Make sure the label type selected in the printer driver is appropriate for the type of disc
loaded in the product.
&
See “Publishing Discs” on page 23.
Banding
❏ Make sure the printable side of the disc is face up in the stacker.
❏ Run the head cleaning utility to clear any clogged ink nozzles.
& See “Cleaning the Print Head” on page 82.
❏ Make sure the label type selected in the printer driver is appropriate for the type of disc
loaded in the product.
&
See “Publishing Discs” on page 23.
❏ Due to the variation in the quality of discs, print results using the same type of discs
from the same data may not be the same.
Incorrect or Missing Colors
❏ Adjust the color settings in your application or in your printer driver settings.
Check the Main window.
See the printer driver online Help for details.