Emulex NQTR0V-NATM - Manual (Page 95)

Novell NetWare 3-13
Restart the Printer Server
The printer server must be stopped and restarted to enable the new
configuration. Use one of the following procedures:
286 Non-Dedicated Servers - VAP
1) At the file server console, enter:
>
F:\ PSERVER STOP
>
F:\ PSERVER START
386 Dedicated Servers - NLM
1) At the file server console, enter:
>
F:\ UNLOAD PSERVER
>
F:\ LOAD PSERVER pserver_name
pserver_name The printer server’s name as defined by
NetWare
Dedicated Printer Servers - 286 or 386
1) Login to the file server.
2) Run PCONSOLE.
3) Select P RINTER S ERVER I NFORMATION .
4) Select the printer server to shut down.
5) Select P RINTER S ERVER S TATUS AND C ONTROL .
6) Select S ERVER I NFORMATION .
7) Select D OWN
This performs an immediate shutdown.
8) From the dedicated printer server, enter:
>
PSERVER fserver_name pserver_name
fserver_name The Novell file server name
pserver_name The printer server name as defined by
Novell NetWare