Emulex NQTR0V-NATM - Manual (Page 147)

7-4 Chapter 7
SOCKDRV.OS2
Verify the file SOCKDRV.OS2 is installed using the OS/2 System Editor.
1) Examine CONFIG.SYS in the LAN Manager root directory.
2) Verify that the LAN Manager section includes a line similar to this:
>
DEVICE = LanRoot\ARPA\SOCKDRV.OS2
LanRoot The LAN Manager root directory.
NumSockets
Verify the NumSockets parameter is correct using the OS/2 System
Editor.
1) Examine TCPUTILS.INI in the LAN Manager root directory.
This parameter is located in the SOCKETS section. LAN Manager uses
1 socket for each active printer.
Installation
To install the software utilities:
1) Insert the distribution diskette or CD-ROM into a drive.
2) Open an OS/2 Window.
3) Select the appropriate drive.
4) Type I NSTALL and press E NTER .
The Installation screen will be displayed.
NOTE: When installing from CD-ROM, change the default
path to d:utils/ps50/Lanman. This path assumes d:
is the CD-ROM drive.
5) Choose L AN M ANAGER .
When the installation is complete the following message will appear:
Installation Completed Successfully.
6) Click E XIT .