Emulex NQTR0V-NATM - Manual (Page 185)

Windows NT 9-3
Without DHCP
1) Login to the Emulex printer server.
Refer to the Remote Login or Local Login section later in this chapter.
2) Enter:
>
Server>> define node ip ip_address
ip_address The IP address of the designated node in decimal
dot notation. For example, 123.234.345.490
Installation
Any Windows NT computer can be used to created a TCP/IP printer if
TCP/IP is installed with printing support. Follow the steps below to
configure a Windows NT computer for TCP/IP printing.
In the C ONTROL P ANEL :
1) Select N ETWORK option.
This opens the N ETWORK S ETTINGS dialog box.
2) Click ADD SOFTWARE button.
This displays the A DD N ETWORK S OFTWARE dialog box.
3) Select TCP/IP Protocol and Related Components.
4) Click C ONTINUE .
This opens the W INDOWS NT TCP/IP I NSTALLATION O PTIONS dialog
box.
5) Check TCP/IP N ETWORK P RINTING S UPPORT .
If TCP/IP is not already installed on this computer, check the other
desired options as described in the Windows NT System Guide.
6) Click OK.
7) Enter the full path to the Windows NT distribution files.
8) Click C ONTINUE .
All necessary files are copied to the hard disk.