Emulex NQTR0V-NATM - Manual (Page 93)

Novell NetWare 3-11
Configure as RPRINTER
Prior to using the Emulex printer server as a Novell NetWare remote printer,
the user must first create a print queue, add the printer server and the printer
then restart the printer server.
Create the Print Queue
1) Login to the Novell file server as supervisor:
>
F:\ LOGIN fileserver\SUPERVISOR
NOTE: A user with supervisor equivalency is not the same
as a printer server operator. Create a printer
server operator account to perform activities such
as bringing down the printer server or obtaining
full printer server status.
2) Enter:
>
Z:\ PCONSOLE
This opens the A VAILABLE O PTIONS menu.
3) Select P RINT Q UEUE I NFORMATION .
4) Press INSERT .
5) Enter the new print queue name.
6) Press ENTER .
7) Select the print queue.
Add the Remote Printer
From the A VAILABLE O PTIONS menu:
1) Select P RINT S ERVER I NFORMATION .
2) Press I NSERT .
3) Enter the new Novell printer server name.
CAUTION: DO NOT name the Novell Print Server with
the same name as the Emulex printer server.