Vivotek FD9388-HTV 5MP Outdoor Network Dome Camera with Night Vision - Manual (Page 387)

VIVOTEK
User's Manual - 387
© 2019 VIVOTEK INC. All Right Reserved
254
8.28 Camera Control
(capability_camctrl_c<0~(n-1)>_zoommodule = 1)
Note: This request requires Viewer privileges.
Method: GET/POST
Syntax:
(for control API)
http://< servername >/cgi-bin/camctrl/camctrl.cgi?[channel=][&camid=]
[&move=] – Move home, up, down, left, right
[&focus=] – Focus operation
[&zoom=] – Zoom in, out
[&zooming=&zs=] – Zoom without stopping, used for joystick
[&vx=&vy=&vs=] – Shift without stopping, used for joystick
[&x=&y=&videosize=&resolution=&stretch=] – Click on
image
(Move the center of image to the coordination (x,y) based on resolution or videosize.)
[ [&speedpan=][&speedtilt=][&speedzoom=][&speedapp=
< value > ][&speedl
ink=] ] – Set speeds
[&return=]
Example:
http://myserver/cgi-bin/camctrl/camctrl.cgi?channel=0&camid=1&move=right
http://myserver/cgi-bin/camctrl/camctrl.cgi?channel=0&camid=1&zoom=tele
http://myserver/cgi-bin/camctrl/camctrl.cgi?channel=0&camid=1&x=300&y=200&resolution=704x
480&videosize=704x480&strech=1
Example: (set the ptz preset with focus mode)
* We support this function when the version number of the PTZ control module is equal or greater
than 5.0.0.20.
http://myserver/cgi-bin/camctrl/camctrl.cgi?name=xxx&focussetting=sync&cam=getsetpreset
PARAMETER
VALUE DESCRIPTION
channel <0~(n-1)> Channel of video source.
camid 0, Camera ID.
move home Move to camera to home position.
up Move camera up.
© 2019 VIVOTEK INC. All Right Reserved
255
PARAMETER VALUE DESCRIPTION
down Move camera down.
left Move camera left.
right Move camera right.
speedpan -5 ~ 5 Set the pan speed.
speedtilt -5 ~ 5 Set the tilt speed.
speedzoom -5 ~ 5 Set the zoom speed.
speedfocus -5 ~ 5 Set the focus speed.
speedapp -5 ~ 5 Set the auto pan/patrol speed.
auto pan Auto pan.
patrol Auto patrol.
stop Stop camera.
zoom wide Zoom larger view with current speed.
tele Zoom further with current speed.
stop Stop zoom.
zooming wide or tele Zoom without stopping for larger view or further view with
zs speed, used for joystick control.
zs 0 ~ 8 Set the speed of zooming, “0” means stop.
vx 0> The slope of movement = vy/vx, used for joystick control.
vy
vs 0 ~ 127 Set the speed of movement, “0” means stop.
x x-coordinate clicked by user.
It will be the x-coordinate of center after movement.
y y-coordinate clicked by user.
It will be the y-coordinate of center after movement.
videosize The size of plug-in (ActiveX) window in web page
resolution The resolution of streaming.
stretch 0 indicates that it uses resolution (streaming size) as the
range of the coordinate system.
1 indicates that it uses
videosize (plug-in size) as the range
of the coordinate system.