Vivotek FD9388-HTV 5MP Outdoor Network Dome Camera with Night Vision User Manual

Page 386

VIVOTEK

386 - User's Manual

254

8.28 Camera Control

(capability_camctrl_c<0~(n-1)>_zoommodule = 1)

Note:

This request requires Viewer privileges.

Method:

GET/POST

Syntax:

(for control API)

http://<

servername

>/cgi-bin/camctrl/camctrl.cgi?[channel=][&camid=]

[&move=] – Move home, up, down, left, right
[&focus=] – Focus operation
[&zoom=] – Zoom in, out

[&zooming=&zs=] – Zoom without stopping, used for joystick
[&vx=&vy=&vs=] – Shift without stopping, used for joystick
[&x=&y=&videosize=&resolution=&stretch=] – Click on
image

(Move the center of image to the coordination (x,y) based on resolution or videosize.)
[ [&speedpan=][&speedtilt=][&speedzoom=][&speedapp=

value

][&speedl

ink=] ]

– Set speeds

[&return=]

Example:

http://myserver/cgi-bin/camctrl/camctrl.cgi?channel=0&camid=1&move=right
http://myserver/cgi-bin/camctrl/camctrl.cgi?channel=0&camid=1&zoom=tele

http://myserver/cgi-bin/camctrl/camctrl.cgi?channel=0&camid=1&x=300&y=200&resolution=704x
480&videosize=704x480&strech=1

Example: (set the ptz preset with focus mode)
* We support this function when the version number of the PTZ control module is equal or greater
than 5.0.0.20.

http://myserver/cgi-bin/camctrl/camctrl.cgi?name=xxx&focussetting=sync&cam=getsetpreset

PARAMETER

VALUE

DESCRIPTION

channel

<0~(n-1)>

Channel of video source.

camid

0, Camera ID.

move

home

Move to camera to home position.

Move camera up.