Vivotek FD9388-HTV 5MP Outdoor Network Dome Camera with Night Vision - Manual (Page 279)

VIVOTEK
User's Manual - 279
© 2019 VIVOTEK INC. All Right Reserved
146
PARAMETER VALUE SECURITY
(get/set) DESCRIPTION
rotationangle 0/7 The different angles which camera supports
for rotation.
* Only avaliable when
"capability_videoin_c<0~(n-1)>_rotation" is
1.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0309b.
orientation flip,mirror,rotatio
n
dependent>
0/7 Indicates the camera supports flip, mirror or
rotation.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0309b.
streamcodec 0/7 Represent supported codec types of each
stream.
This contains a list of positive integers, split
by comma. Each one stands for a stream,
and the definition is as following:
Bit 0: Support MPEG4.
Bit 1: Support MJPEG
Bit 2: Support H.264
Bit 3: Support H.265
mode 0,integer> 0/7 Indicate current video mode.
nmode 0/7 Indicate how many video modes supported
by this channel.
maxsize 0/7 The maximum resolution of all modes in this
channel, the unit is pixel.
nprivacymask 0, integer> 0/7 Number of privacy mask per channel
nresolution 0/7 The maximum resolution options (listed in
"resolution") in current video mode.
© 2019 VIVOTEK INC. All Right Reserved
147
PARAMETER VALUE SECURITY
(get/set) DESCRIPTION
resolution A list of
dependent>
0/7 Resolution options in current video mode.
These options are the possible options for
"videoin_c_s_resolution".
The last one is the maximum resolution in
current mode.
maxresolution A list of 0/7 Represent supported maximum resolution
of each stream in current video mode.
* The element number is defined as
"capability_nmediastream".
minresolution A list of 0/7 Represent supported minimum resolution
of each stream in current video mode.
* The element number is defined as
"capability_nmediastream".
* We support this parameter when the
version number (httpversion) is equal or
greater than 0304b.
maxframerate A list of 0/7 Indicate frame rate that the video source
outputs in current video mode.
One to one mapping to the resolution in
"resolution".
* The element number is defined as
"nresolution" in this group.
* This parameter may be changed when
"videoin_c_cmosfreq"=50 or
"videoin_c_modulation"=pal.
Ex: 30 fps is changed to 25 fps, 60 fps is
changed to 50 fps, and so on.