Esc/vp21 commands, Command list, Cable layouts – Epson EB-825 User Manual
Page 90: Serial connection, Command list cable layouts, P.90
Command List
When the power ON command is transmitted to the projector, the
power turns on and it enters warm-up mode. When the projector's
power has turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
If the command being processed terminates abnormally, an error
message is output and a ":" is returned.
Item
Command
Power ON/OFF
On
PWR ON
Off
PWR OFF
Signal selection
Computer1
Auto
SOURCE 1F
RGB
SOURCE 11
Component
SOURCE 14
Computer2
Auto
SOURCE 2F
RGB
SOURCE 21
Component
SOURCE 24
Video
SOURCE 41
S-Video
SOURCE 42
USB Display
SOURCE 51
USB (EB-826W/825/824/85)
SOURCE 52
LAN(EB-826W/825/85)
SOURCE 53
A/V Mute On/Off
On
MUTE ON
Off
MUTE OFF
A/V Mute selection
Black
MSEL 00
Blue
MSEL 01
Item
Command
Logo
MSEL 02
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
Cable Layouts
Serial Connection
• Connector shape: D-Sub 9-pin (male)
ESC/VP21 Commands
90