Epson EB-825 - Manual (Page 39)

Extended Menu
Sub Menu Function
Display You can make settings related to the projector's display.
Messages
: You can set whether or not (On/Off) to display the Source name when you change the Source, the Color Mode name
when you change the Color Mode, a message when no image signal is input, and so on.
Display Background
* 1 : You can set the screen status for when no image signal is available to Black, Blue, or Logo.
Startup Screen * 1 : You can set whether or not (On/Off) the Startup Screen (the image projected when starting the projector) is displayed.
A/V Mute * 1 : You can set the screen displayed during A/V Mute as Black, Blue, or Logo.
User's Logo *1 You can change the User's Logo that is displayed as a background during Display Background, A/V Mute, and so on. s p.76
Projection You can set from the following according to the way the projector is setup. s p.66
Front , Front/Ceiling, Rear, Rear/Ceiling
You can change the setting as follows by pressing down the [A/V Mute] button on the Remote Control for about five seconds.
FrontWFront/Ceiling
RearWRear/Ceiling
List of Functions
39