FujiFilm X-H2 Mirrorless Camera - Manual (Page 350)

326
P
eripherals and Optional
A
c
c
essories
11
Setting Setting Description Description
A Flash control mode
(group A)
Choose fl ash control modes for groups A, B, and C. TTL%
is available for groups A and B only.
•
TTL : The units in the group fi re in TTL mode. Flash com-
pensation can be adjusted separately for each group.
•
TTL% : If TTL% is selected for either group A or B, you can
specify the output of the selected group as a percent-
age of the other and adjust overall fl ash compensation
for both groups.
•
M : In mode M , the units in the group fi re at the selected
output (expressed as a fraction of full power) regardless
of subject brightness or camera settings.
•
MULTI : Choosing MULTI for any group sets all the units
in all groups to repeating fl ash mode. All units will fi re
multiple times with each shot.
•
D (OFF) : If OFF is selected, the units in the group will
not fi re.
B Flash control mode
(group B)
C Flash control mode
(group C)
D Flash compensation/
output (group A)
Adjust fl ash level for the selected group according to
option selected for fl ash control mode. Note that the full
value may not be applied if the limits of the fl ash control
system are exceeded.
•
TTL : Adjust fl ash compensation.
•
M/MULTI : Adjust fl ash output.
•
TTL% : Choose the balance between groups A and B and
adjust overall fl ash compensation.
E Flash compensation/
output (group B)
F Flash compensation/
output (group C)