Ef-x8 – FujiFilm X-H2 Mirrorless Camera User Manual
Page 343
319
P
eripherals and Optional
A
c
c
essories
11
External Flash Units
EF-X8
The following settings are available when an optional EF-X8
shoe-mounted fl ash unit is attached.
END
ADJUST
EF-X8
MODE
Setting
Setting
Description
Description
A
Flash control mode
Choose from the following options:
•
TTL
: TTL mode. Adjust fl ash compensation (
B
) and choose
a fl ash mode (
C
).
•
M
: The fl ash fi res at the selected output (
B
) regardless of
subject brightness or camera settings. Output is expressed
in fractions of full power, from ⁄ to ⁄. The desired results
may not be achieved at low values if they exceed the limits
of the fl ash control system; take a test shot and check the
results.
•
C
(COMMANDER)
: Choose if the fl ash is being used to con-
trol remote synced fl ash units, for example as part of a stu-
dio fl ash system.
•
D
(OFF)
: The EF-X8 does not fi re. Flash units connected
via the sync terminal will still fi re when the shutter is re-
leased, but can be disabled by lowering the EF-X8 and turn-
ing the units off in the fl ash settings menu.
B
Flash compensation/
output
Adjust fl ash level. The options available vary with the fl ash
control mode (
A
).