Call – EverFocus EDR920 User Manual

Page 65

7. CALL

Press the CALL key and the CALL MENU will pop up as below.

In the CALL MENU, we define :

(1) SEQ: Sequence display on the Call/Matrix monitor. Press SEQ to switch “ON” or “OFF” of the

sequence status.

(2) OSD: Channel name display on the Call/Matrix monitor. Press DISPLAY to switch “ON” or

“OFF” of the OSD status.

(3) CAMERA: The display camera in the Call/Matrix monitor. Press Channel number to set camera.

(4) CALL/MATRIX 1~4: Display the call monitor and Matrix 1~4 monitors.

Press ENTER button to move between monitors which will enable you to make selection of

SEQ, OSD and CAMERA.