EverFocus EDR920 - Manual (Page 36)

(6) EMAIL/NETWORK:
YES: Send an email / Enable alarm network when an alarm occurs.
NO: Do not send an email / Disable alarm network when an alarm occurs.
The email address and e-mail server can be set in the NETWORK SETUP MENU.
(7) BUZZER: Motion buzzer.
ENABLE: To enable a motion buzzer.
DISABLE: To disable a motion buzzer.
(8) MAIN MON: Display on a main monitor when a motion occurs.
NO CHANGE: Nothing changes on the display in the main monitor when a motion occurs.
FULLSCREEN: A full screen pops up when a motion occurs.
(9) CALL MON: Display on a call monitor when an alarm occurs.
NO CHANGE: Nothing changes on the display in the call monitor when an alarm occurs.
CAMERA 1~16 : Display the active camera in full screen mode to the call monitor.
(10) MATRIX MON 1: Display on matrix monitor 1 when an alarm occurs.
NO CHANGE: Nothing changes on the display in the matrix monitor 1 when an alarm occurs.
CAMERA 1~16: Display an assigned camera in full screen mode to the matrix monitor 1.
(11) MATRIX MON 2: Display on matrix monitor 2 when an alarm occurs.
NO CHANGE: Nothing changes on the display in the matrix monitor 2 when an alarm occurs.
CAMERA 1~16: Display an assigned camera in full screen mode to the matrix monitor 2.
(12) MATRIX MON 3: Display on matrix monitor 3 when an alarm occurs.
NO CHANGE: Nothing changes on the display in the matrix monitor 3 when an alarm occurs.
CAMERA 1~16: Display an assigned camera in full screen mode to the matrix monitor 3.
35