LG ProBeam BU70QGA 7000-Lumen 4K Laser SmProjector - Manual (Page 73)

18
ENGLISH
[Power On/Off History]
Display the device’s power on/off history.
[Quick Start+]
This setting puts your Projector in standby mode when it’s turned off so it will help using Projector’s functions quicker
when you turn the Projector back on.
• Some models may not be supported.
• Turning this option on may increase energy consumption.
[Network]
[General] [Network]
[Wired Connection (Ethernet)]
• Wired Connection: Connects the Projector to a local area network (LAN) via the LAN port and configures wired
network settings. Only wired network connections are supported. After setting up a physical connection, the display
will automatically connect without any adjustments on most networks. A small number of networks may require the
display settings to be adjusted. For detailed information, contact your Internet provider or consult your router manual.
• 802.1X EAP: Authentication based on IEEE 802.1X is available for wired connection. Select the desired EAP type and
Phase 2 Authentication, enter the ID/Password registered with the authentication server, and press the CONNECT
button to attempt the connection.
[Wi-Fi Connection]
If you have set your Projector up for a wireless network, you can view and connect to available wireless Internet
networks.
• [Add a Hidden Wireless Network]: You can add a wireless network by manually typing in its name.
• [Connect via WPS PBC]: Press the button on the wireless router that supports PBC to easily connect to the router.
• [Connect via WPS PIN]: Enter the PIN number in the web page of the PIN-supporting wireless router to connect to
the router in a simple manner.
• [Advanced Wi-Fi Settings]: When there is no available wireless network displayed on the screen, you can connect to
the wireless network by entering the network information directly.