LG ProBeam BU70QGA 7000-Lumen 4K Laser SmProjector - Manual (Page 19)

19
ENGLISH
[Edge Blending] – Setting Video Wall
If you make a big single image with multiple projectors, designate a projection position
for each projector.
Video Wall - Setting Tile Mode
1
Turn on all projectors.
2
Set the [Tile Mode] of [Video Wall] to On.
3
Adjust the placement of each projected image.
• Set the number of projectors by using [Row] and [Column] in [Tile Mode
Setting] at [Video Wall].
• Set the position of the projection image in the row sequence and column
sequence.
– Row Sequence: Place the screen from the upper side to the lower side in
the order of 1, 2, and 3.
– Column Sequence: Place the screen from the left side to the right side in
the order of 1, 2, and 3.
4
Repeat the steps on each projector.
5
Set the ID of all projectors and the remote control.
6
When the ID setting and placement are completed, adjust the position
distances and colors of the projected image.
※ There can be up to 9 values of Tile’s Row x Column.