LG ProBeam BU70QGA 7000-Lumen 4K Laser SmProjector User Manual
Page 142

87
ENGLISH
When X appears next to Gateway
•
Check the AP (Router) or consult your Internet service provider.
•
Unplug the power cord of the AP (Router), Cable Modem, wait 10 seconds. Reapply power.
•
Initialize (Reset) on the AP (Router) or Cable Modem.
•
Check the AP (Router) manufacturer’s website to make sure your router has the latest firmware version installed.
•
If you do not know this setting, check the router’s instruction manual and the manual provided by the Internet
provider. If you are still not sure, contact the router company or the Internet company.
When X appears next to DNS
•
Check the AP (Router) or consult your Internet service provider.
•
Unplug the power cord of the AP (Router), Cable Modem, wait 10 seconds. Reapply power.
•
Initialize (Reset) on the AP (Router) or Cable Modem.
•
Check that the MAC address of the projector/AP (Router) is registered with your Internet service provider. (The
MAC address displayed on the pane of the network status window should be registered with your Internet service
provider.)
•
If you do not know this setting, check the router’s instruction manual and the manual provided by the Internet
provider. If you are still not sure, contact the router company or the Internet company.