EnGenius Technologies ENH500 - Manual (Page 62)

9.4 Port Forwarding
Port Forwarding is used to allow public services such as Web Server, Mail Server, or FTP server
to be set up. For example: Set up a Web Server on your computer with port number 8080. A
visitor on the Internet can access your Web Server by entering WAN Port IP with port
number 8080. If the WAN Port IP address is 192.168.5.1, then visitors must enter
http://192.168.5.1:8080. To find out more about common port numbers please consult the
Internet.
Add Entry Press Add Entry to add a rule of Port Forwarding.
Accept Press Accept to confirm the changes.
Accept does not apply the changes – you must go to Status -> Save / Load
to apply the new settings. Please refer to Chapter 4.1 for more information.
Service Name Specify a name for current Port Forwarding rule.
Protocol Select a protocol from drop down list: Both, TCP, or UDP.
Starting Port Specify Starting Port number.
Ending Port Specify Ending Port number.
IP Address Specify IP address.
Save / Cancel Press Save to confirm the changes or Cancel to return previous
settings.