EnGenius Technologies ENH500 User Manual
Page 56
9.1.3 PPPoE (Point-to-Point Protocol over Ethernet)
Select PPPoE as your WAN connection type if your ISP provides a Username and Password. If
the PPPoE is a DSL service, please remove the PPPoE software from your computer as the
software is not necessary with the use of the ENH500.
Internet Connection
Type
Select PPPoE to begin configuration of the PPPoE connection.
MTU
Specify the Maximum Transmit Unit size. EnGenius recommends
that it remains in Auto.
Login
Specify the Username that is given by your ISP.
Password
Specify the Password that is given by your ISP.
Service Name
Specify the Service Name that is given by your ISP.