Enterasys Networks 2G4072-52 - Manual (Page 42)

Connecting to the COM Port for Local Management
3-16 Installation
4. Turn on the modem.
5. With a PC connected to a remote modem, you can configure the switch remotely. To
do so, you must configure your PC VT emulation package with these parameters.
6. When these parameters are set, the Local Management password screen will display.
Refer to the Enterasys Matrix N Standalone Series Configuration Guide for further
information.
Figure 3-14 Connecting to a Modem
Parameter Setting
Mode 7 Bit Control
Transmit Transmit=9600
Bits Parity 8 Bits, No Parity
Stop Bit 1 Stop Bit
1 UTP cable & RJ45 connectors 3 RJ45-to-DB25 modem adapter 5 Remote modem
2 RJ45 COM port 4 Local modem
RESET
CONSOLE
CPU
PWR
GROUP
SELECT
GROUP 3
GROUP 2
GROUP 1
Б А Д В Г