Epson B 500DN - Manual (Page 113)

B-300/B-500DN User’s Guide
Maintaining Your Printer 113
3. Press the d Down or u Up button to select MAINTENANCE, and then press the OK or r Right
button.
4. Press the d Down or u Up button to select HEAD ALIGNMENT, and then press the OK or r Right
button.
5. Press the OK button to print the alignment pattern.
6. Look at the alignment patterns and find the square without any visible bands in sets #1 through
#4.
7. Press the d Down or u Up button to select the number that corresponds to the square for sets
#1 through #4.
8. Press the OK button to register your selection.
Cleaning Your Printer
New :Inkjet Only.In case of SPC, use parts. To keep your printer operating at its best, clean it thoroughly several times a year.
w
Warning:
Be careful not to touch the parts inside the printer.
c
Caution:
❏ Never use alcohol or thinner to clean the printer. These chemicals can damage the printer.
❏ Do not apply grease to the metal parts under the print head.
❏ Be careful to keep water away from the electronic components.
❏ Do not spray the inside of the printer with lubricants.
❏ Unsuitable oils can damage the mechanism. Contact Epson Service Center or a qualified service
person if lubrication is needed.
Note:
After using the printer, close the paper support and the output tray to protect the printer from dust.
Cleaning Inside of Your Printer
Ink and paper build up from the rollers may affect the print quality or may prevent the paper from
feeding smoothly. You can clean the inside of your printer using the control panel.