DJI Zenmuse XT2 Dual 4K/Drone Thermal Camera (19mm, 9 Hz, 336 x 256) User Manual

Page 9

ZENMUSE XT 2

User Manual

6. Tool Icon

Tap for display mode settings.

7. Camera Settings

1) Photo Settings

Shooting modes include Single Shot, Burst: 3/5 frames, Interval Timer (2/3/5/7/10/15/20/30 s).
Photo Format: R-JPEG, JPEG, TIFF (14-bit).

2) Video Settings

The video format can be set independently for the infrared and visual cameras.
Visual camera: MOV or MP4 formats, with differing resolutions.
Infrared camera: MOV, MP4, TIFF Sequence and SEQ formats.

3) General Settings

Video caption: Create an onscreen information file to support the video file.
Anti-flicker: Select the frequency to prevent light flickering.
PIP settings: Set where live views from both cameras are displayed on the screen.

ROI (Region of Interest)
Use this feature to manage color range distribution across the screen to maximize contrast for
regions of highest interest.

Select “Full” to evenly distribute the color spectrum across the entire image.

For instance, if there is a large patch of sky (relatively low temperature) in your image, much of
the color spectrum will be allocated to the lower range, meaning that other parts of the spectrum
will have a lower contrast. In this case, you may select “Sky excluded (33%)” or “Sky excluded
(50%)” to ignore areas of the sky so that most of the spectrum can be allocated to remaining
areas, providing higher contrast and utility for analysis.