DJI Zenmuse XT2 Dual 4K/Drone Thermal Camera (19mm, 9 Hz, 336 x 256) - Manual (Page 14)

14 © 2018 DJI All Rights Reserved.
ZENMUSE XT 2 User Manual
Gain Modes
High Gain mode: A narrower temperature range can be captured with a higher sensitivity to
temperature differences.
Low Gain mode: A wider temperature range can be captured with a lower sensitivity to temperature
differences.
Auto Gain mode (default): The optimal temperature range is automatically selected according to the
temperature range of the image.
External Parameters
The scene emissivity, background temperature, and other external parameters can be set by the
user to improve temperature measurement accuracy.
Temperature Alert
After enabling the Area measurement feature, an alert temperature value can be set.
When the highest temperature in the selected area exceeds the alert value, an onscreen notification
will appear in DJI Pilot.
FFC Settings
Both manual and automatic FFC calibration are supported.
Restore Settings
Tap restore factory default settings to restore the camera to the default settings.
Tap “Format microSD card” to format and remove all content from the microSD card.
SD card 2, which is located near the lens, is used to store TIFF Sequence and SEQ
infrared RAW video only. All other format footage will be stored on SD card 1.
It is recommended to use ImageJ to play the TIFF Sequence video and FLIR Tools to play
SEQ video.
8. Shutter/Record Toggle
Switch between photo and video modes.
9. Shutter/Record Button
Shoot photos or video depending on the camera mode.
10. Playback
Tap to view photos and videos from the microSD card.