Irc-6 infrared remote control, Irc-6 operation, Manual color control – CHAUVET DJ GigBAR Move 5-in-1 Lighting System with Moving Heads, Pars, Derbys, Strobe, and Laser Effects (Black) User Manual
Page 28: Operation
Page 22
Operation
GigBAR MOVE User Manual Rev. 4
IRC-6 Infrared Remote Control
The GigBAR MOVE can be operated with the CHAUVET IRC-6. To enable IR wireless control, follow the
instructions below.
1. Press
to view the main menu on the display.
2. Use
or
until
SYS
is selected.
3. Press
.
4. Use
or
until
IR
is selected.
5. Press
.
6. Use
or
to select
ON
.
7. Press
.
IRC-6 Operation
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode with the IRC-6:
1. Press and hold
on the IRC-6.
2. Press
<+>
or
<–>
to choose between the different auto programs.
Speed
To adjust the auto program speed with the IRC-6:
1. Press
on the IRC-6.
2. Press
<+>
or
<–>
to increase or decrease the program speed.
Sound-Active Mode
To turn on Sound-Active mode with the IRC-6:
1.
Press and hold
on the IRC-6.
2.
Press
<+>
or
<–>
to select a sound-active program.
To adjust the sound sensitivity:
1.
Press
on the IRC-6.
2.
Press
<+>
or
<–>
to increase or decrease the sensitivity.
Manual Color Control
To choose a specific color for the Pars and Derby Lights with the IRC-6:
•
Press any number between
<0>
–
<9>
to choose your color.
To manually control the RGB percentage:
1. Press
(red),
(green),
(blue),
(amber),
(UV), or
(white) to choose your color.
2. Press
<+>
or
<–>
to increase or decrease the percentage of each color.
Black Out
To black out the lasers with the IRC-6:
•
Press
on the IRC-6.
This will turn off all the lasers until the button is pressed again.
NOTE: The IRC-6 will not respond to any inputs when Black Out is activated. If the
product does not respond when a button is pressed, try pressing
.
Black Out may have been activated.
•
Any setting on the IRC-6 will be saved until the system is rebooted. The system will
revert to Auto Mode after reboot.
•
The buttons on the IRC-6 not listed above are reserved for future use.
BLACK
OUT
AUTO
SOUND
SENSI-
TIVITY
SPEED
STROBE
%
MANUAL
FADE
R
G
B
W
UV
A
+
0
-
1
2
3
6
5
4
7
8
9