CHAUVET DJ GigBAR Move 5-in-1 Lighting System with Moving Heads, Pars, Derbys, Strobe, and Laser Effects (Black) - Manual (Page 20)

Page 14
Operation
GigBAR MOVE User Manual Rev. 4
Configuration (Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Automatic Mixed Effect Mode
To run the GigBAR MOVE in automatic mode, follow the instructions below.
1. Press to view the main menu on the display.
2. Use or until AUTO is highlighted.
3. Press .
4. Use or to select Mode .
5. Press
6. Use or to select from the Auto Program options: Mix , Spots , Strobe , Laser ,
Derby , Par , S+SP , L+SP , LS , D+SP , DS , DL , P+SP , PS , PL , PD , PS+SP , PL+SP , PLS , PD+SP ,
PDS , PDL , DLS+SP , PLS+SP , PDS+SP , PDL+SP , or PDLS .
7. Press .
8. Use or to select Speed .
9. Press .
10. Use or to set the automatic program speed from 0–99 .
11. Press .
Sound-Active Mixed Effect Mode
To run the GigBAR MOVE in sound-active mode, do the following:
1. Press to view the main menu on the display.
2. Use or until SOUND is selected.
3. Press .
4. Use or to select Mode .
5. Press
6. Use or to select from the Auto Program options: Mix , Spots , Strobe , Laser ,
Derby , Par , S+SP , L+SP , LS , D+SP , DS , DL , P+SP , PS , PL , PD , PS+SP , PL+SP , PLS , PD+SP ,
PDS , PDL , DLS+SP , PLS+SP , PDS+SP , PDL+SP , or PDLS .
7. Press .
Sound Sensitivity
To set the sound sensitivity on the GigBAR MOVE, follow the instructions below.
1. Press to view the main menu on the display.
2. Use or until SOUND is selected.
3. Press .
4. Use or to select Sensitivity .
5. Press
6. Use or to set the sound sensitivity from 0–99 .
7. Press .
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX signals
that could interfere with the DMX signals from the controller.
• The product will only respond to low frequencies of music (bass and drums).
• The laser will black out when in Sound-Active mode after 3 seconds of silence or noise
below the sensitivity setting.