CHAUVET DJ GigBAR Move 5-in-1 Lighting System with Moving Heads, Pars, Derbys, Strobe, and Laser Effects (Black) - Manual (Page 19)

Page 13 GigBAR MOVE User Manual Rev. 4
Operation
SOUND
Mode
Mix 1–3 Sets mixed effects to sound mode
Spots 1 Sets moving heads to sound mode
Strobe 1 Sets strobe to sound mode
Laser 1 Sets laser to sound mode
Derby 1 Sets derby to sound mode
Par 1 Sets pars to sound mode
S+SP 1 Sets strobe and moving heads to sound mode
L+SP 1 Sets laser and moving heads to sound mode
LS 1 Sets laser and strobe to sound mode
D+SP 1 Sets derby and moving heads to sound mode
DS 1 Sets derby and strobe to sound mode
DL 1 Sets derby and laser to sound mode
P+SP 1 Sets pars and moving heads to sound mode
PS 1 Sets pars and strobe to sound mode
PL 1 Sets pars and laser to sound mode
PD 1 Sets pars and derby to sound mode
PS+SP 1 Sets pars, strobe, and moving heads to sound mode
PL+SP 1 Sets pars, laser, and moving heads to sound mode
PLS 1 Sets pars, laser, and strobe to sound mode
PD+SP 1 Sets pars, derby, and moving heads to sound mode
PDS 1 Sets pars, derby, and strobe to sound mode
PDL 1 Sets pars, derby, and laser to sound mode
DLS+SP 1 Sets derby, laser, strobe, and moving heads to sound mode
PLS+SP 1 Sets pars, laser, strobe, and moving heads to sound mode
PDS+SP 1 Sets pars, derby, strobe, and moving heads to sound mode
PDL+SP 1 Sets pars, derby, laser, and moving heads to sound mode
PDLS 1 Sets pars, derby, laser, and strobe to sound mode
Sensitivity 0–99 Sets sound sensitivity
DMX
DMX
3CH
Select the DMX channel 17CH
35CH
Address 001–510 Set DMX starting address
Slave Select for slave mode
SYS
IR
ON
Turns infrared on or off for IRC-6 control
OFF
FOOT
ON
Turns footswitch control on or off
OFF
PanReverse
ON
Enable/disable pan reverse
OFF
TiltReverse
ON
Enable/disable tilt reverse
OFF
RESET
NO
Reset to factory defaults
YES
• The DMX value will display in white if not receiving the DMX signal, and will display in
yellow if receiving the DMX signal.
• The menu display will turn off if there is no operation within 60 seconds.
• In DMX mode, the fixture will save the last settings when the DMX signal was lost. When
in Master/Slave mode, it will blackout when the DMX signal is lost.
Mode Programming Levels Description