CHAUVET DJ GigBAR Move 5-in-1 Lighting System with Moving Heads, Pars, Derbys, Strobe, and Laser Effects (Black) - Manual (Page 21)

Page 15 GigBAR MOVE User Manual Rev. 4
Operation
Configuration (DMX)
The GigBAR MOVE works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer,
which is available from the Chauvet website http://www.chauvetlighting.com/downloads/
DMX_Primer_rev05_WO.pdf .
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If the starting address is set too high, access to some of the product’s channels could be
restricted.
The GigBAR MOVE uses 3 DMX channels, which defines the highest configurable address to 478 .
For information about the DMX protocol, download the DMX Primer from www.chauvetdj.com .
To select the starting address, do the following:
1. Press to view the main menu on the display.
2. Use or until DMX is highlighted.
3. Press .
4. Press again.
5. Use or to select the DMX Channel: 3CH , 17CH , or 35CH .
6. Press
7. Use or to select Address .
8. Press
9. Use or to increase or decrease the starting address.
10. Press .