CHAUVET DJ GigBAR Move 5-in-1 Lighting System with Moving Heads, Pars, Derbys, Strobe, and Laser Effects (Black) - Manual (Page 27)

Page 21 GigBAR MOVE User Manual Rev. 4
Operation
Wireless Footswitch
The included wireless footswitch provides quick access to preset colors, color-change programs, and
sound-activation through the GigBAR MOVE microphone.
To use the footswitch:
Footswitch Operation
1. Connect the GigBAR MOVE to power. Turn the wireless footswitch
on.
2. Press on the GigBAR MOVE until SYS shows on the
display, and press .
3. Use or to select FOOT then press .
4. Use or to select ON , then press .
5. Use the chart below to activate the desired function.
Pedal Action Functions
1
(Auto Programs)
Tap pedal to activate, then tap to
navigate to desired function
Auto programs
2
(Sound Mode)
Press and hold Sound-active programs
3
(Static Colors)
Tap
Cycles through colors
(Pars and Derby Lights ONLY)
4
(Blackout)
Tap Blackout
The GigBAR MOVE footswitch will work properly in any mode, with a maximum
unobstructed distance of 100 ft (30.5 m). You must turn on the ir on the GigBAR MOVE, set
the ir channel, and navigate to Auto mode before using the footswitch.
1 2 3 4