CHAUVET DJ Helicopter Q6 - Rotating Multi-Effects Light with Laser (RGBW) - Manual (Page 21)

Page 15 of 94 Helicopter Q6 User Manual Rev. 2
Operation
IRC-6 Infrared Remote Control
The Helicopter Q6 is compatible with the IRC-6 infrared remote control from Chauvet. To activate IR mode,
follow the instructions below:
1. Press repeatedly until SEt shows on the display.
2. Press to accept.
3. Press or to select on or oFF .
4. Press .
IRC-6 Operation
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
1. Press on the IRC-6.
2. Press repeatedly to cycle through auto programs, or
Press <0>–<9> to choose an auto program.
To adjust the speed of the automatic program:
1. Press on the IRC-6.
2. Press <+> or <–> to increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
1. Press on the IRC-6.
2. Press repeatedly to cycle through programs, or
Press <0>–<9> to choose a sound-active program.
Manual Mode
To set the Helicopter Q6 in manual mode and choose a static color with the IRC-6:
1. Press (red), (green), (blue), or (white) on the IRC-6.
To control the rotation direction with the IRC-6 in manual mode:
1. Press to toggle clockwise or counter-clockwise rotation.
To control the rotation speed with the IRC-6 in manual mode:
1. Press on the IRC-6.
2. Press <+> or <–> to increase or decrease the rotation speed.
To adjust the strobe rate of the static color:
1. Press on the IRC-6.
2. Press <+> or <–> to increase or decrease the strobe rate.
Black Out
To black out the lights:
1. Press on the IRC-6.
This will turn off all the lights until the button is pressed again.
NOTE: The IRC-6 will not respond to any inputs when Black Out is activated. If the
remote does not respond when a button is pressed, try pressing .
You may have inadvertently activated Black Out.