CHAUVET DJ GigBAR 2 All-In-One Lighting System - Manual (Page 33)

GigBAR 2 User Manual Rev. 7 Page 33 of 156
IRC-6 (Infrared Remote Control 6) Operation
Note : Make sure to point the IRC-6 directly at the receiver on the product.
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
• Press and hold on the IRC-6.
• Press any number between <0> and <9> to choose your auto program.
• Press <+> or <–> to either increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
• Press and hold on the IRC-6.
• Press any number between <0> and <9> to choose your auto program.
Strobe Modes
To adjust the strobe program and rate:
• Press and hold on the IRC-6.
• Press <0> to Strobe All, or any number between <0> and <9> to choose your auto
program.
• Press <+> or <–> to increase or decrease the strobe rate.
• Press again to turn off the strobe.
Program Modes Defined
Button Auto Mode Sound Mode Strobe Mode
<0> AM01 SM01 All strobe White
<1> AP01 SP01 Strobe White 1
<2> AP02 SP02 Strobe White 2
<3> AK01 SK01 Strobe White 3
<4> AL01 SL01 Strobe White 4
<5> APK1 SPK1 Strobe White 5
<6> APL1 SPL1 Strobe UV 1
<7> AKL1 SKL1 Strobe UV 2
<8> APKL SPKL Strobe UV 3
<9> AKLS SKLS Strobe UV 4
Miscellaneous Operation
To adjust the fade rate of the Par and Derby color output:
• Press and hold on the IRC-6.
• Press <+> or <–> to increase or decrease the fade rate.
To adjust the brightness of color or strobe:
• Press <%> on the IRC-6.
1 x Press 2 x Press 3 x Press 4 x Press 5 x Press
100% 75% 50% 25% 0%
To black out the lights:
• Press on the IRC-6. This will turn off all the lights until the button is pressed
again.