CHAUVET DJ GigBAR 2 All-In-One Lighting System - Manual (Page 24)

Page 24 of 156 GigBAR 2 User Manual Rev. 7
Mode Programming Levels Description
Sound Derby Effect SK01 Sets Derby Lights to Sound mode
Sound Laser Effect SL01 Sets laser to Sound mode
Sound Strobe Effect SS** SS01–SS22 Sets strobes to Sound mode and selects effect speed
Sound Par + Derby SPK1 Sets Pars and Derby Lights to Sound mode
Sound Par + Laser SPL1 Sets Pars and laser Sound mode
Sound Par + Strobe SPS1 Sets Pars and strobes to Sound mode
Sound Derby + Laser SKL1 Sets Derby Lights and laser to Sound mode
Sound Derby + Strobe SKS1 Sets Derby Lights and strobes to Sound Mode
Par + Derby + Laser SPKL Sets Pars, Derby Lights and laser to Sound mode
Par + Derby + Strobe SPKS Sets Pars, Derby Lights and strobes to Sound mode
Par + Laser + Strobe SPLS Sets Pars, laser and strobes to Sound mode
Derby + Laser + Strobe SKLS Sets Derby Lights, laser and strobes to Sound mode
General COLOR Setting CoLo
R** R000–R255
Sets both Par and Derby
red values
Note: ONLY 3 of the 4
colors may be used at the
same time.
G** G000–G255
Sets both Par and Derby
green values
B** B000–B255
Sets both Par and Derby
blue values
U** U000–U255
Sets the UV values for the
Par and strobes
DMX Mode Setting d001–d512
3 CH
Sets DMX starting address; selects the DMX
personality DMX range restricted by number of
channels in the selected DMX mode
11 CH
23 CH
Master/Slave Setting Slav Sets to Slave mode
System Options Sys
dSET 1234 Changes arrangement of pods
rSEt Resets to factory defaults
WiFi
on
Turns on/off Wi-Fi antenna for wireless footswitch
off