Mounting, Orientation, Rigging – CHAUVET DJ GigBAR 2 All-In-One Lighting System User Manual
Page 21: Mounting diagram
GigBAR 2 User Manual Rev. 7
Page 21 of 156
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the
Orientation
The GigBAR 2 must be mounted in a position that includes planning for safe laser usage. In
addition, make sure adequate ventilation is provided around the product.
Rigging
•
Before deciding on a location for the product, always make sure there is easy access to the
product for maintenance and programming.
•
Make sure that the structure or surface onto which you are mounting the product can support
•
When mounting the product overhead, always use a safety cable (such as
CH-05
from
Chauvet). Mount the product securely to a rigging point, such as an elevated platform or a
truss.
•
The bracket adjustment knobs allow for directional adjustment when aiming the product to
the desired angle. Only loosen or tighten the bracket knobs manually. Using tools could
damage the knobs.
•
When mounting to the tripod, be sure the stand is tightened properly and leveled.
Mounting Diagram
L-Brackets
Mounting Clamp
Mounting Clamp
Safety Cable
Tripod Mounting
Insertion Point
Bracket Adjustment
Knobs
Bracket Adjustment
Knobs
Pod 1
Pod 2
Pod 3
Pod 4