Epson R380 - Manual (Page 14)

14 Printing From a Memory Card
Inserting the Card
1. Make sure the printer is turned on.
2. Open the memory card cover.
Caution:
If your card requires an adapter, make sure you insert it into the adapter before you
insert it in the slot. Otherwise, the card may get stuck in the slot. Do not insert
more than one card at a time, and do not force the card into the slot.
3. Make sure the memory card access light is off and that no cards are in any of
the slots, then insert your card into the correct slot. See page 13 for details.
The memory card access light flashes and then stays on.
4. Close the memory card cover. See page 16 for printing instructions.
When you want to remove the card, make sure the memory card access light is not
flashing, then pull the card straight out of its slot.
Memory card
access light