BenQ LH730 4000-Lumen Full HD LED DLP Projector User Manual
Page 45
45
Menu operation
Operation
Settings
•
LED Indicator
You can turn off the LED warning lights. This is to avoid any light
disturbance when viewing images in a dark room.
•
Power On/Off Settings
•
Direct Power On
: Allows the projector to turn on automatically once
the power is fed through the power cord.
•
Signal Power On
: Sets whether to turn the projector directly on
without pressing
POWER
or
ON
when the projector is in
standby mode and detects a HDMI or DisplayPort signal.
•
Auto Power Off
: Allows the projector to turn off automatically if no
input signal is detected after a set period of time to prevent
unnecessary waste of light source life.
Security Settings
•
Panel Key Lock
With the control keys on the projector and remote control locked, you can
prevent your projector settings from being changed accidentally (by
children, for example). When the
Panel Key Lock
is on, no control keys on
the projector and remote control will operate except
POWER
.
To release panel key lock, press and hold (the right key) on the projector
or remote control for 3 seconds.
If you turn off the projector without disabling panel key lock, the projector will still be in
locked status the next time it is turned on.
•
Password
/
Power On Lock
Utilizing the password function on page 24.
Network Settings
•
Wired LAN
Connecting the projector to the Internet on page 26
.
•
AMX Device Discovery
When this function is
On
, the projector can be detected by AMX controller.
•
MAC Address (Wired)
Displays the mac address for this projector.
Factory Default
Returns all settings to the factory preset values.
The following settings will still remain:
Projector Position
,
2D Keystone
,
Auto Vertical
Keystone
,
High Altitude Mode
,
Baud Rate
,
Corner Fit
,
Digital Lens Shift
,
Blanking
,
Light
Source Information
,
Security Settings
,
Network Settings
,
Image Memory
.
Reset System
Returns all the settings on the
System
main menu to the factory default
values.
The following settings will still remain:
Light Source Information
,
Security Settings
,
Network Settings
.