BenQ LH730 4000-Lumen Full HD LED DLP Projector User Manual
Page 20
20 Connection
Connecting audio
The projector has built-in mono speaker(s) which are designed to provide basic audio
functionality accompanying data presentations for business purposes only. They are not
designed for, nor intended for stereo audio reproduction use as might be expected in home
theater or home cinema applications. Any stereo audio input (if provided), is mixed into a
common mono audio output through the projector speaker(s).
The built-in speaker(s) will work only when
Internal Speaker
is selected in the
Advanced
menu -
Audio
>
Audio Outputs
menu.
Connecting the Wireless Dongle (optional for
LH730
)
The projector has equipped with a
WIRELESS DONGLE
port for the Wireless Dongle
(EZC5201BS) which supports wireless projection between the projector and the following
systems: iOS, macOS, Android, Windows.
After inserting the WiFi dongle into the
WIRELESS DONGLE
port, select
Wireless Display
from
the source selection bar. You can follow the on-screen instructions to enable wireless
projection.
Connecting the projector to the Internet
1. Select the WiFi SSID (BenQ_xxxxxxxx) of the projector in the WiFi settings on your device.
2. Enter the password from the projected image.
3. Open your web browser and go to the address of the projector (192.168.203.1).
4. Select a WiFi network that you want to join.
5. Enter the password if asked.
Performing wireless projection
• The projector is only capable of playing mixed mono audio, even if a stereo audio input is connected.
• If the selected video image is not displayed after the projector is turned on and the correct video source
has been selected, check that the video source device is turned on and operating correctly. Also check
that the signal cables have been connected correctly.