BenQ LH730 4000-Lumen Full HD LED DLP Projector - Manual (Page 23)

23 Operation
Using the menus
The projector is equipped with 2 types of On-Screen Display (OSD) menus for making various
adjustments and settings.
•
Basic OSD menu: provides primary menu functions. (See Basic Menu on page 28 )
• Advanced OSD menu: provides full menu functions. (See Advanced Menu on page 29 )
To access the OSD menu, press MENU on the projector or remote control.
• Use the arrow keys ( / / / ) on the projector or remote control to move through the menu
items.
• Use OK on the projector or remote control to confirm the selected menu item.
The first time you use the projector (after finishing the initial setup), press MENU , and the
Advanced OSD menu will be displayed.
Below is the overview of the Basic OSD menu.
If you intend to switch from the Basic OSD menu to the Advanced OSD menu, follow the
instructions below:
1. Go to
Menu Type and press OK .
2. Press / to select Advanced and press OK . Your projector will switch to Advanced OSD
menu.
Below is the overview of the Advanced OSD menu.
The OSD screenshots below are for reference only, and may differ from the actual design.
Menu type
Sub-menu and status
Current input signal
Function keys
Main menu
Current input signal
Sub-menu and status
Function keys
Picture Mode
2
4
2
Presentation
Exit Exit
3
Auto
Aspect Ratio
Light Source Mode
2D Keystone
Volume
Brightness
Information
Menu Type
SmartEco
50
Basic menu
1
10
1
2
3
4
Picture Picture Mode
Sharpness
Reset Current Picture Mode
Advanced Color Settings
User Management
3
4
1
Brightness
Contrast
Audio
Display
Installation
System
Information
Presentation
Enter Return Exit
2
1
2
3
4