BenQ LH730 4000-Lumen Full HD LED DLP Projector - Manual (Page 11)

11 Positioning your projector
Positioning your projector
Choosing a location
Before choosing an installation location for your projector, take the following factors into
consideration:
• Size and position of your screen
• Electrical outlet location
• Location and distance between the projector and the rest of your equipment
You can install your projector in the following ways.
After turning on the projector, go to Advanced Menu - Installation > Projector Position and
press / to select a setting.
You can also use
QUICK INSTALL on the remote control to access this menu.
1. Front
Select this location with the projector placed
on the table in front of the screen. This is the
most common way to position the projector
for quick setup and portability.
2. Rear
Select this location with the projector placed
on the table behind the screen. Note that a
special rear projection screen is required.
3. Front Ceiling
Select this location with the projector
suspended upside-down in front of the screen.
Purchase the BenQ Projector Ceiling/Wall
Mount Kit from your dealer to mount your
projector.
4. Rear Ceiling
Select this location with the projector
suspended upside-down from behind the
screen. Note that a special rear projection
screen and the BenQ Projector Ceiling/Wall
Mount Kit are required for this installation
location.