BenQ LH730 4000-Lumen Full HD LED DLP Projector - Manual (Page 31)

31 Menu operation
User
Management
There is one user-definable mode if the current available picture modes are
not suitable for your need. You can use one of the picture modes (except
the User1 / User2 mode) as a starting point and customize the settings.
• Load Settings From
1. Go to Picture > Picture Mode .
2. Press / to select User1 or User2 .
3. Press to highlight User Management , and press OK . The User
Management page is displayed.
4. Select Load Settings From and press OK .
5. Press / to select a picture mode that is closest to your need.
6. Press OK and BACK to return to the Picture menu.
7. Press to select the sub-menu items you want to change and adjust
the values with / . The adjustments define the selected user mode.
• Rename User Mode
Select to rename the customized picture mode ( User1 / User2). The new
name can be up to 9 characters including English letters (A-Z, a-z), digits
(0-9), and space (_).
1. Go to
Picture > Picture Mode .
2. Press / to select User1 or User2 .
3. Press to highlight User Management , and press OK . The User
Management page is displayed.
4. Press to highlight Rename User Mode and press OK . The Rename
User Mode page is displayed.
5. Use / / / , and OK to set desired characters.
6. When done, press BACK to save the changes and exit.
Brightness
The higher the value, the brighter the image. Adjust this control so the black
areas of the image appear just as black and that detail in the dark areas is
visible.
Contrast
The higher the value, the greater the contrast. Use this to set the peak white
level after you have previously adjusted the Brightness setting to suit your
selected input and viewing environment.
Sharpness The higher the value, the sharper the picture becomes.