Philips P-Line 43" UHD 4K Digital Signage Display User Manual

Page 31

43BDL3117P/50BDL3117P/55BDL3117P

1~7: playlist number.
Autoplay: autoplay function .

WOL

Choose to turn on or off the wake on LAN function.
Choose from : {Off} / { On}

Light sensor (require Philips accessory CRD41 External

Sensor Box)

Choose to turn on or off backlight adjustment according to

environment brightness.

Choose from : {Off} / { On}

Human sensor (require Philips accessory CRD41 External

Sensor Box)

This function will turn the backlight On when it senses the

presence of human and turn it off after a specified period of

time.
The options are:
•

{Off} (Default), {10 Min.}, {20 Min.}, {30 Min.}, {40 Min.}, {50

Min.}, {60 Min.}

Power LED Light

Select {

Off

} to turn off the indicator.

Network settings

• DHCP Enable -> Cannot modify IP address/Subnet mask/

Default gateway

• DHCP Disable-> Can manually input IP address/Subnet

mask/Default gateway.

Configuration1 reset

Reset all settings in Configuration1 menu to the factory

preset values.

Factory reset

Reset all settings in the OSD menus of {Picture}, {Screen},

{Audio}, {PIP}, {Configuration1}, {Configuration2}, and

{Advanced option} to the factory preset values.
Press

[ ]

button to select {Reset}, and press [OK]

button to do the reset.

6.2.5. Configuration2 menu

Audio

Screen

Picture

Configuration 1

Configuration 2

Option

Information OSD
Logo

OSD turn off
OSD transparency

Monitor ID

Monitor Info

HDMI EDID

Heat Status

OSD Rotation

Language
Configuration2 Reset

English

Landscape

1 . 4

4 Sec

OSD turn off

Set the period of time the OSD (on-screen display) menu

stays on the screen.
The options are: {5 ~ 100} seconds.

OSD Transparency

Adjust OSD transparency.
•

{0} - Transparency off.

• {1-100} - Transparency level 1-100

Information OSD

Set the period of time the information OSD is displayed on

the upper right corner of the screen. The information OSD

will display when input signal is changed.

The information OSD will remain on the screen with {Off}

selection.
The options are: {1 - 60} seconds.

Logo

Choose to enable or disable the picture of Logo when

turning on your display.

The options are: {Off} /{On}

Monitor ID

Set the ID number for controlling the display via the RS232

connection.

Each display must have a unique ID number when multiple

sets of display are connected. Monitor ID number range is

between 1 to 255.
• {1-255} – {Monitor ID} The default setting is 1.
• {1-254} – {Monitor group} The default setting is 1.
• {1-15} – {Tiling matrix} The default setting is 1.
• {Auto ID} The {Auto ID} setup function enables setting up

{Monitor ID} of connected machine according to {Tiling

matrix} settings. Example: Tiling matrix sets as 4

• {Tiling matrix}: Tiling matrix number range is between 1

to 15. The default setting is 1.

Monitor Id

Monitor group

• {Auto ID}: The option are: {Start} / {End}. The default is

{End}.

• Switch to Start option to set up IDs of machines backward

from current one.

Once the setup is completed, the option exits to End

automatically.

To use this function, serially connect all machines with

RS-232 cable and set their Control ports to RS-232 too.