Philips P-Line 43" UHD 4K Digital Signage Display - Manual (Page 19)

43BDL3117P/50BDL3117P/55BDL3117P
17
3.2. Input/Output Terminals
2 1
12
13
14
15
16
17
18
3 4 5 6 7 8 9 10 11
HDMI OUT HDMI 2 IN HDMI 3 IN HDMI 1 IN DVI-I IN DP IN DP OUT
RS232
OUT
RS232
IN
USB A
RJ45
MICRO SD
IR-OUT
AUDIO OUT
PC LINE IN
IR-IN
1 AC IN
AC power input from the wall outlet.
2
MAIN POWER SWITCH
Switch the main power between On and Off.
3
DisplayPort IN /
4
DisplayPort OUT
DisplayPort video input / output.
5
DVI-I IN
DVI-I video input.
6
HDMI 1 IN /
7
HDMI 2 IN /
8
HDMI 3 IN /
9 HDMI OUT
HDMI video/audio input /output
10
RS232 IN /
11
RS232 OUT
RS232 network input / output for the loop-through
function.
12 IR IN / 13 IR OUT
IR signal input / output for the loop-through function.
NOTES:
• This display’s remote control sensor will stop working
if the jack [IR IN] is connected.
• To remotely control your A/V device via this display,
refer to page 24 for IR Pass Through connection .
14 AUDIO OUT
Audio output to external AV device.
15 PC LINE IN
Audio input for VGA source (3.5mm stereo phone).
16
USB A
Connect your USB storage device and service port.
17
MICRO SD
Insert a Micro SD card.
18
RJ-45
LAN control function for the use of remote control signal
from control center.