Philips P-Line 43" UHD 4K Digital Signage Display - Manual (Page 21)

43BDL3117P/50BDL3117P/55BDL3117P
19
3.3.2. ID Remote Control
Set remote control ID number when using several displays.
Press [ ID ] button. The red LED blinks twice.
1. Press [ID SET] button for more than 1 second to enter the
ID Mode. The red LED lights up.
Press the [ID SET] button again to exit from ID mode. The
red LED lights off.
Press the digit numbers [ 0 ] ~ [ 9 ] to select the display you
want to control.
For example: press [ 0 ] and [ 1 ] for display No.1, press [ 1 ] and [ 1 ]
for display No.11.
The numbers available are from [ 01 ] ~ [ 255 ].
2. Not pressing any button within 10 seconds will exit the ID
Mode.
3. If a wrong button is pressed, wait 1 second after the red
LED lights off and then lights up again, then press the
correct digits again.
4. Press [ ENTER ] button to confirm. The red LED blinks twice
and then lights off.
NOTE:
• Press [ NORMAL ] button. The green LED blinks twice,
indicating the display is in normal operation.
• It is necessary to set up the ID number for each display
before selecting its ID number.
• Use “ ” (pause) key on the remote control to freeze
the screen. Use “ ” (play) key on the remote control to
unfreeze the screen.
• The “freeze” feature only can be adopted on “real” video
sources like VGA, AV, YPbPr, HDMI, DVI, DP.
• Any operation on the remote control or video mode
change will unfreeze the screen.