Ir pass-through connection, Wire-connecting to network – Philips P-Line 43" UHD 4K Digital Signage Display User Manual

Page 26

Text mode
Original mode

43BDL3117P/50BDL3117P/55BDL3117P

4.5. IR Pass-through Connection

DVD / VCR / VCD

(DVD / VCR / VCD)

Remote Control

[IR OUT]

[IR IN]

4.6. Wire-connecting to Network

[RJ-45]

ROUTER

INTERNET

Network Settings:

1. Switch the router on and enable its DHCP setting.
2. Connect the router to this display with an Ethernet cable.
3. Press

[ ] HOME

button on the remote control, then select

Setup

4. Select

Connect to network

, then press

[

]

button.

Wait until this display finds the network connection.

6. If the “End User License Agreement” window prompts, accept the agreement.
NOTE: Connecting with a shielded CAT-5 Ethernet cable to comply with the EMC directive.