Christie Access Series II UHD752-L 75" UHD 4K Commercial Monitor User Manual
Page 37
Display panel menu contents
Access II Series LCD Panel User Guide
020-001836-01 Rev.1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
37
System Menu Content
Language
Sets the OSD menu language preference.
Date / Time
Sets date and time.
Sources
Enables or disables selected source options. Regular, Enhanced and
Disabled options are available for HDMI sources, if the display supports
Ultra HD. Regular and Enhanced options are affecting the colour
settings of the selected HDMI source. To watch 4K images from an
HDMI source, the related source setting must be set as Enhanced if the
connected device is HDMI 2.0 compatible. Set as Regular if the
connected device is HDMI 1.4 compatible. Set accordingly or disable the
related HDMI source by setting as Disabled.
Note: HDMI cables longer than 5 metres and not HDMI certified, can
cause display problems.
More
Displays other setting options of the Display.
Menu Timeout
Changes timeout duration for menu screens.
Standby LED
Enables or disables the functionality of the standby led. If disabled,
the led does not function.
Software Upgraed
Displays current software version. Press OK to see the upgrade options.
Use these options to start a manual search for software updates and set
your automatic scan preference.
Auto Display OFF
Sets the required time for the Display to automatically go into
standby mode when not being operated.
Auto Video Sharing
Audio Video Sharing feature allows you to share files stored on your
smartphone or tablet PC. If a compatible smartphone or tablet PC and
the appropriate software is installed, you can share/play photos on your
Display.
For more information, refer to the sharing software
instructions.
Videowall Settings
Press OK to open the Video Wall Settings menu screen. Video Wall
Settings, Row Count, Column Count, Cell and Offset options are available.
CEC
With this setting enable and disable CEC functionality completely.
Press Left or Right button to enable or disable the feature.
CEC Auto power on
This function allows the connected HDMI-CEC compatible device to
turn on the Display and switch to its input source automatically. Press
Left or Right button to enable or disable the feature.
Quick Standby
If this feature is enabled, the display can be turned on again with
the RS232 and Lan commands if it is turned off through it. Press Left
or Right button to enable or disable the feature.
DP Steam Setting (*)
Sets the DisplayPort stream type. MST and SST options are available.
This menu item appears only when the input source is set to DP.
USB Auto Play
Sets your Display to start playing the media content installed on a
removable device automatically. Refer to USB Auto Play Feature
section for detailed information.