Christie Access Series II UHD752-L 75" UHD 4K Commercial Monitor - Manual (Page 35)

Display panel menu contents
Access II Series LCD Panel User Guide
020-001836-01 Rev.1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
35
OPS settings
Using the scheduler options set the unit to turn on automatically at defined
time intervals with the defined input source setting on the required days of
the week. Press
OK to open the Scheduler Settings menu screen. You
can set up to four different schedulers.
Highlight the first checkbox of the desired scheduler option and check it
by pressing the
OK button. Define a time for the Display to be turned on
automatically. Highlight the time box next to the first checkbox and press
the
OK button, use the directional and numeric buttons on the remote to
set a time. Press the OK button again when done.
Perform the same steps to set a time for the Display to turn off.
Define a source for your scheduler. Highlight the box located under the
Source tab for your scheduler option and press the OK button. Set as
required using the left/right directional buttons. The Source option is set
as Last Source , the input source is not changed at the power-up. If the
Source option is set as USB , the media files in the connected USB device
are played back automatically as explained in the section entitled ‘ USB
Auto Play Feature ’.
Select the week day(s) for your scheduler setting to be activated. Highlight
the checkbox under the required day tab and press
OK to check.
Highlight and press OK a second time to uncheck a box. The scheduler is
active on the checked days of the week.
Set a backlight scheduler. After setting the
On , Off , Source and day
options highlight the checkbox under the Backlight column and press
OK . The checkbox is checked and backlight level setting screen is
displayed. Set On value and Off value using the sliders and then press
OK to save. If you set a backlight scheduler, the display does not turned
on or off, only the backlight values are changed at defined time interval.
If
Source option is set as Last Source the backlight settings will be
applied to all sources; otherwise, the settings are applied to the selected
source only.
Press the Green button on the main scheduler screen to save
settings when complete.
Scheduler Settings
Using the scheduler options, set the unit to turn on automatically at
defined time intervals with the defined input source setting on the
required days of the week. Press OK to open the Scheduler Settings
menu screen. Set up to four different schedulers. Highlight the
first checkbox of to the required scheduler option and check it by
pressing the OK button. Define a time for the display to be turned on
automatically. Highlight the time box next to the first checkbox and
press the OK button, use the directional and numeric buttons on the
remote to set a time. Press the OK button again when done.
Perform the same steps to set a time for the Display to turn off.
Define a source for your scheduler. Highlight the box located under the
Source tab for your scheduler option and press the OK button, then
set as required using the Left/Right directional buttons. If the Source
option is set as Last Source, the input source is not changed at the
power-up. If the Source option is set as USB, the
media files in the connected USB device is played back automatically as
explained in the section entitled USB Auto Play Feature.
Select the week day(s) for your scheduler setting to be activated.
Highlight the checkbox under the required day tab and press OK to
check. Highlight and press OK a second time to uncheck a box. The
scheduler is active on the checked days of the week.
Press the Green button to save settings when complete.