Christie Access Series II UHD752-L 75" UHD 4K Commercial Monitor - Manual (Page 27)

Access II Series LCD Panel User Guide
020-001836-01 Rev.1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved. 2 7
Display panel menu
contents
Learn the structure of the display panel menu tree.
System > Picture menu
Mode
You can change the picture mode to suit your preference or requirements.
Picture mode can be set to one of these options: Text, Game, Sports Signage and Natural
Contrast Adjusts the light and dark values on the screen.
Brightness Adjusts the brightness values on the screen.
Sharpness Sets the sharpness value for the objects displayed on the screen.
Colour Sets the colour value, adjusting the colours.
Energy Saving
This Display is designed to be environmentally friendly. If you set this option to
Minimum, Medium, Maximum or Auto the display reduces energy consumption by
regulating the backlight level accordingly. If you like to set the backlight level to a fixed
value set as Custom and adjust the Backlight (located under this setting) manually using
left or right buttons on the remote.
If the right button is pressed while auto option is selected the left button is pressed
Custom option is selected, “Screen will be off in 15 seconds.” message will be displayed
on the screen.
Select proceed and press OK to turn the screen immediately. If no button is pressed,
the screen turns off in 15 seconds. Press any button on the remote or on the Display
to turn the screen on again.
When the display is not in use, please switch off or disconnect the display from the
mains plug. This will also reduce energy consumption.
NOTE: Available options may differ depending on the selected mode.
Backlight
Controls the backlight level. The backlight function will be inactive if the Energy
Saving is set to an option other than Custom.
Advanced Settings
Dynamic
Contrast
Change the dynamic contrast ratio to the required value.
Noise Reduction
If the signal is weak and the picture is noisy, use the Noise Reduction
setting to reduce the amount of noise.
Colour Temp
Sets the desired colour temperature value. Cool (1300K), Normal (9300K) and
Warm (8500K) options are available.
Picture Zoom Sets the desired image size format.
Picture Shift
Available depending on the Picture Zoom setting. Highlight and press OK , then use
directional buttons to shift the picture upwards or downwards.