Christie Access Series II UHD752-L 75" UHD 4K Commercial Monitor - Manual (Page 17)

Installing a display panel
Access II Series LCD Panel User Guide
020-001836-01 Rev.1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved. 17
At the location where the space between tiles is the tightest, use the spacer tool to ensure there is a
minimum of 0.5mm, or the thickness of a credit card, between adjacent LCD display panels.
Related information
Installing the IR extender cable (on page 16)
Installing the Wi-Fi dongle (on page 15)
Installing a display panel on an indented wall
When installing the display panel on an indented wall, ensure there is sufficient space around the
display panel and the wall for ventilation.
The ambient temperature must be between 0 to 35°C (32 to 95°F). Do not expose the product to
direct sunlight.
Configuring the display panel after installation
After turning the display panel on for the first time, complete the initial configuration.
1. Power on the display panel.
2. Using the display panel remote, select the display language and press OK .
3. Select the country and press OK
4. Configure the Signage settings, such as the OSD orientation and display panel ID.
Model name, Serial number, and Software version cannot be modified.
5. Press OK .
6. Configure the display panel to connect to a wired or wireless network.
7. Press OK .