BenQ ST8602S 86" 4K SmSignage Display - Manual (Page 49)

APPS 49
InstaShare
Select to launch InstaShare . With this application, you can mirror the display's
screen on your smartphone or tablet for hands-on annotation and mirror the screen of
your smartphone or tablet on the display.
To use InstaShare :
1. Make sure your mobile device (such as smartphone or tablet) and the display are
connected to the same network.
2. Select the connection guide and scan the QR code to download and install the
InstaShare app on your mobile device.
3. Open the InstaShare app on your mobile device, and then click the InstaShare
ID name that you want to connect to or enter the pairing code.
4. Enter the connect code shown on the upper right corner of the display or you can
also find the connection code in Setting ( ).
5. Once the mobile device has successfully connected to the display, a confirmation
message will appear on the display. Select Allow on the display to confirm the
connection.
6. Once connected you can:
- Mirror the display's screen on your mobile device by tapping Screen Mirroring
on your mobile device.
- Mirror the device’s screen on the display by tapping on your mobile device.
- Operate the display by using your mobile device as a remote control.
Before launching the application, make sure your display is properly connected to lnternet.
Once connected, any operations on the display or mobile device will also show up on your
mobile device and display.