BenQ ST8602S 86" 4K SmSignage Display - Manual (Page 34)

Menu operations 34
Other Input
Display settings
Leave the Android system and connect to other input sources like VGA, DP, or HDMI.
Then go to Display .
• Press  /  /  /  on the remote control and press OK to confirm.
• Press on the remote control to exit the menu.
• The display automatically enters energy saving mode when no one is detected within
the sensor’s range.
• The display automatically turns off when no one is detected within the sensor’s range
for a long period of time.
Adjust settings (VGA-only)
Use the H. Position , V. Position , Clock , and Phase functions to manually adjust the
image.
Menu Description
Zoom mode Press  /  on the remote control. Options are PTP , 16:9 , 4:3 .
You can also select Auto to adjust the image.
Menu Description
H. Position Press  /  on the remote control to move the screen to the left
or right.
V. Position Press OK on the remote control to lock or unlock the remote
control IR sensor on the front panel of the display.
Clock Clock adjusts how wide the input pixels are. Press  /  on the
remote control to make adjustments.
Phase Phase is in relation to frequency. Press  /  on the remote
control to make adjustments.