Basic operations, Turning the display on or off, Switching input signals – BenQ ST8602S 86" 4K SmSignage Display User Manual
Page 19
Basic operations
19
Basic operations
Turning the display on or off
1. Be sure to follow the instruction of
2. Before turning on the display, make sure the Power switch is set to ON. The system
will enter standby mode.
Switching input signals
Press the
INPUT
button and those signal selection buttons on the remote control or the
INPUT
button on the control panel to select an input signal.
Power
Switch
The display’s standby mode still consumes power. To completely cut off power supply, set the
Power switch to OFF (
O
) and then disconnect the power cord from the power outlet.
• Only by switching on the master switch will either power button work. To turn on or off the
display, press the power button on the display’s control panel or on the remote control.
• Turning off the power still consumes power. The users have to un-plug the plug to completely
cut off the power supply.
Power
Button