Initial setup, Setting – BenQ ST8602S 86" 4K SmSignage Display User Manual
Page 21
Basic operations
21
Initial setup
After you have connected the display to the power, you are ready to power on the
display. The first time you power on the display, you will be guided through a series of
setup screens. Follow the on-screen instructions or the steps below to start up your
display and complete the initial setup.
1. Turn on the display. Wait for the display to boot up with the BenQ screen. This may
take a moment.
2. Select
Next
on the screen to begin. Follow the on-screen instructions to set up the
language, date and time, and network. Or your can skip some of these steps and
complete the setup later.
Setting
• Press
MENU
on the remote control or
MENU
button on the panel to enter the OSD
menu. You can also select
Setting
on the home screen to go to the OSD menu.
• Under
Input Source
, you can select a desired input source. Refer to
for more information.
InstaShare
is not preloaded. You need to download the app via BenQ Suggests. Refer to
for more information.